How To Sew An Elasticized Apron for kids

Sewing An Elasticized Apron for Kids

Are you looking for a fun and easy sewing project for your kids? Making an elasticized apron for them can be a great way to introduce them to the world of sewing and also get them excited about helping out in the kitchen. This article will guide you through the process of creating a simple yet practical apron for your little ones.

Gathering Materials

The first step in sewing an elasticized apron for kids is to gather all the necessary materials. You will need:

- 1 yard of fabric (cotton or linen works well)

- 1.5 yards of 1-inch wide elastic

- Coordinating thread

- Scissors

- Measuring tape

- Pins

- Iron and ironing board

Once you have all of these materials, you can begin the process of sewing an apron for your kids.

Start by measuring your kid to determine the appropriate length of the apron. Measure from the top of their chest to just below their knees, and then add an extra 2 inches for the waistband and hem.

Cutting the Fabric

Once you have your measurements, it's time to cut the fabric. Start by laying the fabric out on a flat surface and using your measuring tape and fabric markers to mark the measurements you took earlier. Use your scissors to cut the fabric along the marked lines, creating a rectangular piece of fabric for the main body of the apron.

Next, you'll need to cut two long strips of fabric to create the waistband and ties for the apron. These strips should be about 4 inches wide and long enough to tie comfortably around your child's waist and behind their neck. Once you have all of your fabric pieces cut, it's time to move on to the next step.

Adding the Elastic

The next step in sewing an elasticized apron for kids is to add the elastic. Start by folding over the top edge of the main body of the apron by 1 inch and pressing it with your iron. This will create a clean edge for the elastic casing. Then, stitch along the bottom edge of the folded-over fabric, leaving a small opening to insert the elastic.

Next, cut a piece of elastic to the same length as the top edge of the apron. Use a safety pin to thread the elastic through the casing you created, being careful not to let the other end of the elastic get pulled into the casing. Once the elastic is all the way through, overlap the two ends by half an inch and stitch them together securely. Then, stitch the opening in the casing closed, and distribute the gathers evenly along the top edge of the apron.

Attaching the Waistband and Ties

After the elastic is in place, you can move on to attaching the waistband and ties. Start by folding the long strips of fabric in half lengthwise and pressing them with your iron to create a crease. Then, open up the strips and fold the long edges towards the center crease, enclosing the raw edges, and press again.

Once that is done, fold the ends of the strips over a half-inch and press them with your iron. Next, stitch along all of the folded edges to create a clean, finished look. Finally, pin the waistband and ties in place on the apron, making sure to center them and keeping the raw edges aligned. Stitch the waistband and ties to the apron securely, and your apron is almost complete.

Finishing Touches

The final step in sewing an elasticized apron for kids is to add any finishing touches. This could include adding pockets to the front of the apron, embroidering your child's name on the front, or adding any other decorative touches that you and your child would like. Once you're happy with the look of the apron, give it a final press with your iron, and it's ready to be worn!

In conclusion, sewing an elasticized apron for kids can be a fun and rewarding project that will not only introduce your child to the world of sewing but also provide them with a practical and personal item that they can use for years to come. So gather your materials, follow the steps outlined in this article, and get ready to watch your child's face light up with pride as they show off their new apron. Happy sewing!